User Manual
UMN:CLI
V8102
725
Command
Mode
Description
match origin
{
egp
|
igp
|
incom-
plete
}
Route-map
Matches BGP origin code.
egp: learned via Exterior Gateway Protocol
igp: local IGP
incomplete: the origin of the path information is
unknown or learned through other means
match
route-type external
{
type-1
|
type-2
}
Matches the route type.
To delete the specified match criteria, use the following command.
Command
Mode
Description
no match
as-path
[
WORD
]
Route-map
Removes the specified match criteria.
no match community
{<1-99> | <100-199> |
WORD
} [
exact-match
]
no match
interface
[
INTERFACE
]
no match
ip address
[{<1-199> | <1300-2699> |
WORD
}]
no match
ip address prefix-list
[
WORD
]
no match
ip next-hop
{<1-199> | <1300-2699> |
WORD
|
prefix-list
[
WORD
] }
no match
ip next-hop WORD
no match
{
metric
|
tag
} <0-4294967295>
no match origin
{
egp
|
igp
|
incomplete
}
no match
route-type external
{
type-1
|
type-2
}
Step 3
Use the
set
command that specifies the set redistribution actions to be performed, if the
match criteria are met.
Command
Mode
Description
set
aggregator as
<1-65535>
A.B.C.D
Route-
map
Sets the AS number for the route map and router ID.
set
as-path prepend
<1-65535>
Modifies an AS path for a route.
set
atomic-aggregate
Sets an atomic aggregate attribute.
set
community
{
AA:NN
|
internet
|
local-AS
|
no-advertise
|
no-export
}
[
additive
]
Sets the communities attribute.
AA:NN : AA= AS number, NN = number assigned to
community
internet: specifies the internet
local-AS: specifies no sending outside the local AS
no-advertise: specifies no advertisement of this
route to eBGP peers
no-export: specifies no advertisement of this route to
any peer
set
community
[
none
]
