UMN:CLI
User Manual
V8102
770
To display the information of MAC filtering and MAC table data, use the following com-
mand.
Command
Mode
Description
show onu mac-filter gpon
OLT-ID
Enable/Global
Shows the MAC filtering function.
show onu mac-filter
[
ONU-ID
]
Interface
[GPON]
show onu mac gpon OLT-ID
ONU-ID uni
{
eth
|
virtual-eth
}
UNI-PORT
Enable/Global
Shows the MAC table data of ONU
’s UNI ports.
show onu mac ONU-ID uni
{
eth
|
virtual-eth
}
UNI-PORT
Interface
[GPON]
13.2.9
POTS Interface Configuration
To configure the parameters of POTS interface in an ONT, use the following command.
Command
Mode
Description
onu voip-sip ONU-ID phone-
number pots POTS-NUMBER
NUMBER
[
display DISPLAY
]
Interface
[GPON]
Saves a phone number and a display information of a
specified phone device connected to POTS interface at
an ONU managed by OMCI protocol.
ONU-ID: 1-128 or ONU serial number
POTS-NUMBER: POTS port number
NUMBER: phone number
DISPLAY: display information
no onu voip-sip ONU-ID phone-
number pots POTS-NUMBER
Deletes the configured data parameters of VoIP user.
For the enhanced system security, the V8102 can use authentication for a VoIP user to
have access to the softswitch.
To configure the authentication user name and password for VoIP user to have access to
softswitch, use the following command.
Command
Mode
Description
onu voip-sip ONU-ID auth pots
POTS-NUMBER
NAME
[
PASSWD
]
Interface
[GPON]
Configures an user ID and password for a specified
VoIP device connected to an ONU to have access to
softswitch.
ONU-ID: 1-128 or ONU serial number
POTS-NUMBER: POTS port number
NAME: user name used for authentication
PASSWD: password used for authentication
no onu voip-sip ONU-ID auth
pots POTS-NUMBER
Deletes the configured authentication information for
VoIP user.
The user display name, phone number, authentication user name and password is limited
to a maximum of 25 characters (bytes).
i
