User Manual
UMN:CLI
V8102
771
To display VoIP service and VoIP line status information, use the following command.
Command
Mode
Description
show onu voip line gpon OLT-ID
ONU-ID
Enable
Global
Shows the information of VoIP service and line status.
ONU-ID: 1-128 or ONU serial number
show onu voip line ONU-ID
Interface
[GPON]
13.2.10
VoIP MGC Configuration
13.2.10.1
Message ID Configuration
To configure the message ID according to the specific VoIP service, use the following
command.
Command
Mode
Description
onu voip-mgc ONU-ID message-
id service VOIP_SERVICE MES-
SAGE_ID
Interface
[GPON]
Configures the message ID according to the specific
VoIP service.
ONU-ID: ONU ID or serial number
VOIP_SERVICE: VoIP service number
MESSAGE_ID: message ID
no onu voip-mgc ONU-ID mes-
sage-id service VOIP_SERVICE
Deletes the configured message ID.
For the details of how to create and configure the VoIP service, see
13.2.10.2
ONT Termination ID Configuration
The attribute specifies the base string for the MGC (H.248) physical termination ID(s) for
the ONT. This string is intended to uniquely identify an ONT. Vendor-specific termination
identifiers (i.e., port IDs) are optionally added to this string to uniquely identify a termina-
tion on a specific ONT.
To configure the termination ID on POTS interface of ONT, use the following command.
Command
Mode
Description
onu voip-mgc ONU-ID termina-
tion-id
pots
POTS_NUMBER
TERMINATION_ID
Interface
[GPON]
Specifies the termination ID on POTS interface of ONT.
ONU-ID: ONU ID or serial number
POTS_NUMBER: POTS port number
TERMINATION_ID: termination ID
no onu voip-mgc ONU-ID termi-
nation-id pots POTS_NUMBER
Deletes the configured termination ID.