UMN:CLI
User Manual
V8102
788
(1) Downloading Firmware to OLT
To download ONU (ONT) firmware in the system, use the following command.
Command
Mode
Description
copy
{
ftp
|
tftp
}
onu firmware
download
Enable
Downloads ONU firmware via FTP or TFTP.
To remove the downloaded ONU (ONT) firmware in OLT, use the following command.
Command
Mode
Description
remove onu firmware
{
all
|
FILE-
NAME
}
Enable
Removes the downloaded ONU (ONT) firmware in
OLT.
To display the list of the downloaded ONU (ONT) firmware in OLT, use the following
command.
Command
Mode
Description
show onu firmware-list
Enable
Global
Interface
[GPON]
Shows the downloaded ONU (ONT) firmware list in
OLT.
(2) Auto Upgrade Configuration
Download GPON ONU firmware using the following command.
Command
Mode
Description
onu
auto-upgrade
firmware
NAME FW_NAME
Global
Configures to be auto-upgraded with the specified
firmware for the ONU.
NAME: ONU model name
FW_NAME: ONU firmware name
onu
auto-upgrade
firmware
NAME FW_NAME
{
ftp A.B.C.D
USER PASSWD
|
tftp
A.B.C.D
}
Configures to be auto-upgraded with the specified
firmware for the ONU through the TFTP/FTP server.
NAME: ONU model name
FW_NAME: ONU firmware name
A.B.C.D: FTP/TFTP server IP address
USER: FTP server user name
PASSWD: FTP server password
no onu auto-upgrade firmware
NAME
Deletes the auto-upgrade configured for the specified
ONU.
NAME: ONU model name
The firmware downloaded by
copy
{
ftp
|
tftp
}
onu download
command is deleted when
the OLT system restarts. If you want to perform auto-upgrade even when the firmware
does not exist in the OLT, you should specify the TFTP/FTP server from which the firm-
ware can be downloaded.
i
