UMN:CLI
User Manual
V8102
804
13.3.2.9
DLF Trap to CPU
To enable/disable the upstream Destination Lookup Failure (DLF) packet forwarding to a
CPU, use the following command.
Command
Mode
Description
trap-to-cpu dlf enable
ONU-Profile
Forwards the upstream DLF packets to a CPU.
trap-to-cpu dlf disable
Forwards the upstream DLF packets according to the
VLAN rules.
13.3.2.10
MAC Full Policy
By default, ONT will block new source MAC address frame when ONT MAC table is full.
The protecting mechanism can be configurable by 'block or forwarding', thus you can con-
figure the basic policy of ONT when MAC table is full.
To block/forward new source MAC address frame when MAC table is full, use the follow-
ing command.
Command
Mode
Description
mac-full policy forward
ONU-Profile
Forwards new source MAC address frame when ONU
MAC table is full.
mac-full policy drop
Blocks new source MAC address frame when ONU
MAC table is full.
13.3.2.11
ONT Auto-configuration and Service Provisioning
Automated provisioning and remote management of ONTs are vital service delivery activi-
ties of ISPs and operators - helping to reduce costs, lead times and complexity as well as
to deploy new subscriber services.
ONT provisioning method simplifies network operations by eliminating the need to config-
ure every network element interface between the OLT ingress and subscriber ports of our
ONTs (H64x series) for diverse GPON service applications.
If the ONT service provisioning settings in XML file are saved in a FTP server prior to in-
stallation/activation of ONTs, the OLT can relay the configured XML file from the FTP
server to the activated ONTs using the commands.