UMN:CLI
User Manual
V8102
810
13.3.3.5
Activating Administration for Ethernet UNI
To enable/disable the administration of the Ethernet UNI port, use the following command.
Command
Mode
Description
uni eth
UNI-PORT
port-admin
{
enable
|
disable
}
ONU-Profile
Enables/disables the administration of Ethernet UNI
port on the specified ONU.
To see the admin status of the ONU (ONT) UNI, use
show onu uni-status
command.
13.2.22 Displaying ONU Information
13.3.3.6
Mapping between T-CONT ID and DBA profile
To specify the GEM ports (priority queue) per T-CONT and the bandwidth of GEM port by
mapping between T-CONT ID and DBA profile, use the following command.
Command
Mode
Description
tcont TCONT-ID dba-profile DBA-
PROFILE
ONU-Profile
Specifies the priority queues of T-CONT by mapping
between the DBA profile and T-CONT ID. Sets T-
CONT
’s bandwidth by specifying the DBA profile
DBA-PROFILE: DBA profile name
no tcont TCONT-ID dba-profile
Disables the mapping between T-CONT ID and DBA
profile.
13.3.4
Saving Profile
After configuring an ONU profile, you need to save the profile with the following command.
Command
Mode
Description
apply
ONU-Profile
Saves an ONU profile configuration.
Even if you modify a running profile, you also need to use the
apply
command to apply
the changes to ONUs (ONTs).
13.3.5
Applying ONU Profile
To apply/release an ONU profile to/from connected ONUs (ONTs), use the following
command.
Command
Mode
Description
onu-profile
ONU-IDs NAME
Interface
[GPON]
Applies an ONU profile to specified ONUs.
ONU-IDs: ONU ID (1 to 128) or ONU serial number
NAME: ONU profile name
no onu-profile
ONU-IDs
Releases an ONU profile from connected ONUs.
ONU-ID: ONU ID (1 to 128) or ONU serial number
i
i