User Manual
UMN:CLI
V8102
829
the following command.
Command
Mode
Description
voip-profile NAME
Traffic-VoIP
Connects VoIP profile to the current VoIP service.
NAME: VoIP profile name
no voip-profile
Disconnects the specified VoIP profile.
You need to create a VoIP profile first to connect the existing VoIP profile to the current
VoIP service. For the details of how to create and configure the VoIP profile, see
13.4.6.3
IP-path Managed VoIP
If you configure the VoIP service management mode as IP-path managed by using
voip-
profile ip-path
command, you need to set IP-path configuration in
VoIP IP-path Configu-
ration
mode.
When you use the
voip-profile ip-path
command, you enter automatically
VoIP IP-path
Configuration
mode.
Whenever an ONU is deployed with the IP-path managed VoIP service, the OLT should
assign the URL of a VoIP configuration file to communicate with the ONU VoIP client. The
V8102 provides an authentication method for ONUs to have access to the VoIP configu-
ration server.
To configure IP-path managed VoIP mode, use the following command.
Command
Mode
Description
ip-path uri URI
Traffic
VoIP-IP-
path
Configures a VoIP configuration server.
URI: IP-path URI
ip-path auth NAME
[
PASSWD
]
Sets the user ID and password for IP-path managed
model to have access to VoIP configuration server.
NAME: user name used for authentication
PASSWD: password used for authentication
no ip-path
{
uri
|
auth
}
Deletes the configured VoIP configuration server or
authentication information.
To specify the protocol on the current VoIP service, use the following command.
Command
Mode
Description
protocol
{
h248
|
sip
|
mgcp
}
Traffic
VoIP-IP-
path
Specifies the protocol on the current VoIP service.
sip: Session Initiation Protocol
h248, mgcp: Media Gateway Control protocol
(= MEGACO)
13.4.6.4
POTS UNI Configuration
To configure the user network interface, use the following command.
i
i