User Manual
UMN:CLI
V8102
835
13.4.7.8
Displaying TDM Pseudowire Information
To display the information of TDM pseudowire profiles, use the following command.
Command
Mode
Description
show tdm-pw-profile
[
NAME
]
Global
Interface
[GPON]
Shows the information of TDM pseudowire profiles.
NAME: TDM pseudowire profile name
To display the list information of source MAC addresses for TDM pseudowire of ONU, use
the following command.
Command
Mode
Description
show onu tdm-pw source-
mac gpon OLT-ID ONU-ID
Enable/Global
Shows the list of source MAC addresses for
TDM pseudowire of the specified ONU.
show onu tdm-pw source-
mac ONU-ID
Interface [GPON]
13.4.8
Management Mode
The OLT manages the ONU through an ONU management and control interface (OMCI)
path. An OMCI is a configuration transmission path defined in the GPON standard. If the
OLT manages the ONU through a non-OMCI path, this ONU
’s UNI port is connected as a
Virtual Eth and is controlled by its web/TR-69/SNMP management system.
To specify the management mode of ONU
’s UNI port, use the following command.
Command
Mode
Description
mgmt-mode uni
{
eth
|
pots
|
ces
|
video
}
UNI_PORT
{
omci
|
non-
omci link virtual-eth
NUMBER
}
Traffic-
Profile
Specifies the management mode of ONU
’s UNI port
using OMCI or non-OMCI path.
UNI_PORT: UNI port number (1-32)
no mgmt-mode uni
{
eth
|
pots
|
ces
|
video
}
UNI_PORT
Deletes the specified UNI port
’s management mode.
To display the configured management mode of ONU, use the following command.
Command
Mode
Description
show onu uni-mgmt gpon OLT-
ID ONU-ID
Enable
Global
Shows the management mode of ONU ID.
show onu uni-mgmt ONU-ID
Interface
[GPON]
13.4.9
Video Return Path Mode
RF return path technology enables the pay-per-view and video-on-demand services that
are simply offered over traditional MSO (Multiservice Operator) infrastructure. In order to
configure video RF return path service, you need to create a Video return service ID.
