UMN:CLI
User Manual
V8102
836
A single traffic profile can be used to serve one single video return path service ID.
To create the VoIP service ID and enter the configuration mode for the service, use the
following command.
Command
Mode
Description
video-return-path-service SER-
VICE_ID
Traffic-
Profile
Creates the VoIP service ID and enters the
configuration mode for the service.
SERVICE_ID: 1, Video return service number
no
video-return-path-service
SERVICE_ID
Deletes the created VoIP service ID.
After opening
Video Return Path Service Configuration
mode, the prompt changes from
SWITCH(config-traffic-pf[
NAME
])# to SWITCH(config-traffic-pf[
NAME
]-vrp[
ID
])#.
To configure the video return path service-related parameters, use the following com-
mand.
Command
Mode
Description
frequency HERTZ
Traffic-VRP
Specifies the VRP tunner frequency to use. (unit:
Hertz)
vrp
{
mode1
|
mode2-256k
|
mode2-1m
|
mode2-3m
}
Specifies the format to be used for the VRP service.
mode1: SCTE 55-1 (256 kbit/s data rate, 62 byte
PDUs, preceded by the unique word 0xCC CC CC 00)
mode2-1m: SCTE 55-1 (1.544 Mbit/s data rate, 59 byte
PDUs, preceded by the unique word 0xCC CC CC 0D)
mode2-256k: SCTE 55-1 (256 kbit/s data rate, 59 byte
PDUs, preceded by the unique word 0xCC CC CC 0D)
mode2-3m: SCTE 55-1 (3.088 Mbit/s data rate, 59 byte
PDUs, preceded by the unique word 0xCC CC CC 0D)
mode1-physical
{
default
|
alter-
nate
} {
stage-6
|
stage-7
|
stage-8
|
stage-9
|
stage-10
|
stage-11
|
stage-12
|
stage-13
}
Controls the physical layer configuration to be used in
mode 1.
default: DQPSK default mode
alternate: DQPSK alternate mode
stage-6: Randomizer stage 6 preload (Bit 7)
stage-7: Randomizer stage 7 preload (Bit 6)
stage-8: Randomizer stage 8 preload (Bit 5)
stage-9: Randomizer stage 9 preload (Bit 4)
stage-10: Randomizer stage 10 preload (Bit 3)
stage-11: Randomizer stage 11 preload (Bit 2)
stage-12: Randomizer stage 12 preload (Bit 1)
stage-13: Randomizer stage 13 preload (Bit 0)
