UMN:CLI
User Manual
V8102
876
Command
Mode
Description
no r-bit-transmit-set-policy
Deletes the configured R-bit transmit set policy.
To configure the R-bit receive policy, use the following command.
Command
Mode
Description
r-bit-receive-policy
{
none
|
play-
out
|
send-idle
}
PW-
Maintenance-
Profile
Defines the action toward the N x 64 TDM interface
when remote failure is indicated on packets received
from the PSN (R-bit set = 0b10 while the L-bit is
cleared).
none: Do nothing (default)
play-out: Play out service-specific RAI/REI/RDI code
send-idle: Send channel idle signalling and idle chan-
nel payload to all DS0s comprising the service
13.9.7
SES Threshold
To configure the SES threshold, use the following command.
Command
Mode
Description
ses-threshold VALUE
PW-
Maintenance-
Profile
Defines the number of lost, malformed or otherwise
unusable packets expected in the PSN to TDM direc-
tion within a one-second interval that causes a severely
errored second to be counted. Stray packets do not
count toward a severely errored second, nor do pack-
ets whose L-bit is set at the far end.
VALUE: Number of lost, malformed or otherwise unus-
able packets (default: 3)
no ses-threshold
Deletes the configured SES threshold.
13.9.8
Saving Pseudowire Maintenance Profile
After configuring a pseudowire maintenance profile, you need to save the profile with the
following command.
Command
Mode
Description
apply
PW-
Maintenance-
Profile
Saves a pseudowire maintenance profile configuration.
Whenever you modify a pseudowire maintenance profile, you should apply the changes
again using the
apply
command. If not, the changes will not be applied.
i