UMN:CLI
User Manual
V8102
880
To enable/disable the performance monitoring (PM) function to collect the traffic statistics
of the configured GEM NCTP ports, use the following command.
Command
Mode
Description
pm gem-nctp
PM-Profile
Enables the PM function to collect the counters of the
configured GEM port network CTP for a specified traffic
profile.
no pm gem-nctp
Disables the PM function to collect the counters of the
configured GEM port network CTP.
13.10.3
Saving PM Profile
After configuring a PM profile, you need to save the profile with the following command.
Command
Mode
Description
apply
PM-Profile
Saves a PM profile configuration.
Even if you modify a running profile, you also need to use the
apply
command to apply
the changes to ONUs (ONTs).
13.10.4
Displaying PM Profile Information
To display the information of PM profiles, use the following command.
Command
Mode
Description
show pm-profile
[
NAME
]
Global
Interface
[GPON]
PM-Profile
Shows the information of PM profiles.
NAME: PM profile name
To display the information of current profile, use the following command.
Command
Mode
Description
show current-profile
Current-
Profile
Shows the information currently configured for the
profile.
13.10.5
Displaying ONU Traffic Statistics
To display the traffic statistics of an ONU applied by PM profile, use the following com-
mand.
Command
Mode
Description
show onu statistics gpon OLT-ID
[
ONU-ID
]
Enable
Global
Shows the information of ONU counters collected via
PM profile. (15 Min, Prev_15 Min, total)
show onu statistics
[
ONU-ID
]
Interface
ii