UMN:CLI
User Manual
V8102
906
| Released Nos Image on SFU |
-------------------------------------
* GPIU Released Nos
Version : 3.01
Revision : 1025
Size : 9078904
* SFU Released Nos
Version : -
Revision : -
Size : 0
14.2.2
Auto Upgrade
Upgrade SIU by enabling IU auto upgrade using the following command.
Command
Mode
Description
slot
upgrade-mode
iu
SLOT_NUMBER
auto
Global
Enable IU auto upgrade function.
SLOT: IU slot number, 1 to 2
slot upgrade
iu SLOT_NUMBER
Select a slot number of IU and performs the upgrade.
When auto upgrade function is enabled, the V8102 compares the downloaded SFU firm-
ware in the system with the firmware currently loaded in the inserted SIUs. If the version
of the firmware from IU side is lower than that of the firmware from the SFU side, then the
firmware upgrade will automatically start.