User Manual
UMN:CLI
V8102
125
Command
Mode
Description
show status temp
Enable
Global
Shows the status and configured threshold of system
temperature.
6.1.6.5
System Memory
To set the threshold of system memory in use, use the following command.
Command
Mode
Description
threshold memory
<20-100> {
5
|
60
|
600
}
Global
Sets the threshold of system memory in the unit of
percent (%).
20-100: system memory in use (default:80%)
5|60|600: time interval (default: 60 seconds)
threshold
memory
iu
SLOT_NUM
<20-100>
{5 | 60 |
600}
Sets the threshold of IU memory
SLOT_NUM: slot number
no threshold memory
[
iu
SLOT-
NUM]
Deletes the configured threshold of system memory.
6.1.7
MAC Learning Mode
The V8102 supports two methods of MAC learning that are CPU-based learning (CML)
and the switching fabric-based learning (SML). You can choose the way how to learn
MAC addresses by CLI.
The following table shows the functional performance of CML mode and SML mode.
Functions
CML
SML
MAC learning
Slow(default)
Fast
CPU load during MAC learning
High
Low
Interval of Chip calling
Depending on the
number of packets
Periodically
Interconnection with CPU
Accurate
Delay
Security Policy
Accurate
Delay
ERP enabled port
Disable
Enable
Tab. 6.1
CML and SML Capability Comparison
To specify MAC learning mode in the system, use the following command.
Command
Mode
Description
mac-learning mode
{
cml
|
sml
}
Global
Specifies MAC learning mode in the system.
cml: CPU managed-learning (default)
sml: switching fabric managed-learning