UMN:CLI
User Manual
V8102
126
6.1.8
The Utilization and Aging-time of L3 Table
To display the urtilization of packets in use on L3 interface, host entries, LPM entries and
L3 ECMP entries, use the following command.
Command
Mode
Description
show ip tables summary
Enable
Global
Shows the usage of L3 interface, host, LPM, ECMP
entries.
To specify the L3 table aging time, use the following command.
Command
Mode
Description
ip
tables
aging-time
<10-
4294967295>
Global
Specifies the L3 table aging time (default: 300 sec-
onds).
6.1.9
SD Card
To display SD card information, use the following command.
Command
Mode
Description
show sdcard information
Enable
Global
Shows the fan status and the temperature for the fan
operation.
The sdcard can be safely unmounted/mounted by using the following command.
Command
Mode
Description
umount sdcard
Enable
Global
Unmounts a SD card from the SFU.
mount sdcard
Mounts a SD memory card to the SFU.
6.1.10
Power Alarm Configuration
To enable the alarm notification when detecting an error of power (PSU), use the follow-
ing command.
Command
Mode
Description
alarm
{
0
|
1
} {
0
|
1
} {
0
|
1
}
Enable
Enables the alarm notification using trap message
when an error occurs in a power supply unit.
0 | 1 : select PSU A (0) or PSU B (1)
0 | 1 : select alarm-out YES (1) or NO (0)
0 | 1 : send tram message YES (1) or NO (0)
6.1.11
Enabling FTP/TFTP Connection
To enable/disable the connection via FTP, use the following command.
Command
Mode
Description
