User Manual
UMN:CLI
V8102
203
use the following command.
Command
Mode
Description
ethernet oam tm
one-way
receive meg
NAME mepid
<1-8191> [<5-6000>]
Global
Receives TST frame for one-way through-
put measurement.
5-6000: duration to send OAM PDU (de-
fault: 5s)
To make one-way throughput measurement of unicast or multicast transmission of TST
frames, use the following command.
Command
Mode
Description
ethernet oam tm one-way transmit
meg NAME mepid
<1-8191>
mul-
ticast
[<5-6000> <1-5> <100-1000>
<100-1000> <0-7> <5-1480> <0-3>]
Global
Makes one-way throughput measurement of multicast
transmission of TST frames.
NAME: MEG
’s name
5-6000: duration to send OAM PDU (default: 5s)
1-5: part duration of OAM PDU to be transmitted at the
same transmission rate (default: 1)
100-1000: the number of OAM PDUs to be transmitted
per second at first time (default: 100)
100-1000: the increment of number of OAM PDUs to
be transmitted (default: 200)
0-7: OAM PDU priority (default: 7)
5-1480: the length of Test TLV (default: 5)
0-3: the pattern of Test TLV used for diagnostics test
(default: 0)
ethernet oam tm one-way transmit
meg
NAME
mepid
<1-8191>
unicast
rmepid
<1-8191> [<5-6000>
<1-5> <100-1000>
<100-1000> <0-
7> <5-1480> <0-3>]
Makes one-way throughput measurement of unicast
transmission of TST frames.
1-8191: source/destination MEP IDs
To make two-way throughput measurement by LBM frames, use the following command.
Command
Mode
Description
ethernet oam tm two-way meg NAME mepid
<1-8191>
rmepid
<1-8191> [<5-6000> <1-5>
<100-1000>
<100-1000> <1-1000>
<0-7> <5-
1480> <0-3>]
Global
Makes two-way throughput measure-
ment by LBM frames
7.7.17
Displaying Y.1731 OAM Information
To display the information of Y.1731 OAM, use the following command.
Command
Mode
Description
show ethernet oam meg
[
NAME
]
Global
Shows information of Y.1731 maintenance entity
group.
show ethernet oam config-error
Shows the Y.1731 configuration errors of a specific
