UMN:CLI
User Manual
V8102
276
Command
Mode
Description
ip arp inspection log-buffer
entries
<0-1024>
Global
Specifies the number of entries in log-buffer.
0-1024: the max. number of entries (default: 32)
ip arp inspection log-buffer
logs
<0-1024>
interval
<0-
86400>
Sets the interval for displaying syslog messages of
entries.
0-1024: the number of syslog messages per specified
interval (default: 5)
0-86400: interval value in second (default: 1 sec)
To delete the configured options of log-buffer function, use the following command.
Command
Mode
Description
no ip arp inspection log-buffer
{
entries
|
logs
}
Global
Deletes the configured options of log-buffer function.
To display the configured log-buffer function and entries
’ information, use the following
command.
Command
Mode
Description
show ip arp inspection log
Enable
Global
Displays the configured log-buffer function.
To clear all of collected entries in the list, use the following command.
Command
Mode
Description
clear ip arp inspection log
Enable
Global
Clears all of collected entires in the log-buffer list.
8.1.4.6
Displaying ARP Inspection
To display a status of the ARP inspection, use the following command.
Command
Mode
Description
show ip arp inspection
[
vlan
VLANS
]
Enable
Global
Shows a status of the ARP inspection.
show ip arp inspection statistics
[
vlan
VLANS
]
Shows collected statistics of the ARP inspection.
To clear collected statistics of the ARP inspection, use the following command.
Command
Mode
Description
clear ip arp inspection statistics
[
vlan
VLANS
]
Global
Clears collected statistics of the ARP inspection.
