User Manual
UMN:CLI
V8102
291
8.3
System Authentication
For the enhanced system security, the V8102 provides two authentication methods to ac-
cess the switch such as Remote Authentication Dial-In User Service (RADIUS) and Ter-
minal Access Controller Access Control System Plus ().
8.3.1
Authentication Method
To set the system authentication method, use the following command.
Command
Mode
Description
login
{
local
|
remote
} {
radius
|
tacacs
|
host
|
all
} {
enable
|
disa-
ble
}
Global
Sets a system authentication method.
local: console access
remote: telnet/SSH access
radius: RADIUS authentication
tacacs: authentication
host: nominal system authentication (default)
all: all types of the authentication
no login
{
local
|
remote
} {
radius
|
tacacs
|
host
|
all
}
Deletes a configured system authentication method.
no login
8.3.2
Authentication Interface
If more than 2 interfaces exist in the V8102, you can set one interface to access RADIUS
or TACACS server.
To set an authentication interface, use the following command.
Command
Mode
Description
login
radius
interface
{
management
|
vlan
VLANS
|
loopback
|
gigabitethernet IFPORT
|
tengigabitethernet IFPORT
|
gpon IFPORT
|
channelgroup GROUP
} [
A.B.C.D
]
Global
Sets an authentication interface.
radius: RADIUS authentication
tacacs: authentication
INTERFACE: interface name
A.B.C.D: source IP address (optional)
login
tacacs
interface
{
management
|
vlan
VLANS
|
loopback
|
gigabitethernet IFPORT
|
tengigabitethernet IFPORT
|
gpon IFPORT
|
channelgroup GROUP
} [
A.B.C.D
]
no login
{
radius
|
tacacs
}
interface
Deletes a specified authentication inter-
face.
