UMN:CLI
User Manual
V8102
306
8.5.3
Initializing Authentication Status
The user can initialize the entire configuration on the port. Once the port is initialized, the
supplicants accessing to the port should be re-authenticated.
Command
Mode
Description
dot1x initialize
PORTS
Global
Initializes the authentication status on the port.
8.5.4
Restoring Default Value
To restore the default value of the 802.1x configuration, use the following command.
Command
Mode
Description
dot1x default
PORTS
Global
Restores the default value of the 802.1x configuration.
8.5.5
Displaying 802.1x Configuration
To display 802.1x configuration, use the following command.
Command
Mode
Description
show dot1x
Enable
Global
Shows 802.1x configuration on the system.
show dot1x
PORTS
Shows 802.1x configuration on the port.
8.5.6
802.1x User Authentication Statistics
It is possible for user to make reset state by showing and deleting the statistics of 802.1x
user authentication.
To display the statistics about the process of 802.1x user authentication, use the following
command.
Command
Mode
Description
show dot1x statistics
PORTS
Enable
Global
Shows the statistics of 802.1x user authentication on
the port.
To make reset state by deleting the statistics of 802.1x user authentication, use the fol-
lowing command.
Command
Mode
Description
dot1x clear statistics
PORTS
Global
Makes reset state by deleting the statistics of 802.1x
on the port.
