UMN:CLI
User Manual
V8102
352
9.3.6.4
Class Creation
One class can include several flows. You can simply handle and configure the packets on
several flows at once.
To create a class including more than 2 flows, use the following command.
Command
Mode
Description
class
admin NAME flow
FLOW1
[
FLOW2
] [
FLOW3
]
Global
Creates an admin class including at least 2 admin
flows.
NAME: admin class name
FLOW: admin flow name
To delete configured admin class or all admin classes, use the following command.
Command
Mode
Description
no class
admin all
Global
Deletes all admin classes.
no class
admin NAME
Deletes specified admin class.
NAME: admin class name
no class admin
NAME flow
FLOW1
[
FLOW2
] [
FLOW3
]
Removes specified admin flows from class.
NAME: admin class name
FLOW: admin flow name
9.3.7
Admin Rule Action
9.3.7.1
Admin Policy Creation
For the V8102, you need to open
Admin-Policy Configuration
mode first. To open
Policy
Configuration
mode, use the following command.
Command
Mode
Description
policy
admin NAME
create
Global
Creates an admin policy and opens
Admin-Policy Con-
figuration
mode.
NAME: admin-policy name.
After opening
Admin Policy Configuration
mode, the prompt changes from
SWITCH(config)# to SWITCH(config-admin-policy[NAME])#.
To display elete configured admin policy or all admin policies, use the following command.
Command
Mode
Description
show policy admin
[
NAMES]
Global
Shows specified admin policy.
To delete configured admin policy or all admin policies, use the following command.
Command
Mode
Description
