UMN:CLI
User Manual
V8102
360
unicast: unicast queue
non-unicast: non-unicast queue
no qos buffer egress
{<0-7> |
all
}
max-limit
{
unicast
|
non-
unicast
}
Removes the buffer cell limit values.
no qos buffer egress
{<0-7> |
all
}
min-limit
{
unicast
|
non-
unicast
}
To display the configured guaranteed buffer size of the port and queue number, use the
following command.
Command
Mode
Description
show qos buffer-config
{
gigabitethernet
|
tengigabitethernet
|
gpon
}
IFPORT
{
unicast
|
non-unicast
}
Enable
Global
Shows the configured guaranteed buffer size of
the port.
show interface queue-status all
{
unicast
|
non-unicast
}
Shows the unicast/multicast packet buffer usage
status per queue.
IFPORTS: interface port number
unicast: unicast traffic
non-unicast: multicast traffic
show interface queue-status cpu
show interface queue-status
{
giga-
bitethernet
|
tengigabitethernet
|
gpon
IFPORT
{
unicast
|
non-unicast
}
show interface statistics
{
avg-perq
|
buffer
}
all
{
unicast
|
non-unicast
}
Shows the traffic statistics of buffer or the aver-
age packet per queue for all Ethernet/PON
ports.
unicast: unicast traffic
non-unicast: multicast traffic
show interface statistics
{
avg-perq
|
buffer
}
cpu
Shows the incoming traffic statistics of buffer or
the average packet per queue into CPU.
show interface statistics
{
avg-perq
|
buffer
}
{
gigabitethernet
|
tengiga-
bitethernet
|
gpon
}
IFPORT
{
unicast
|
non-unicast
}
Shows the traffic statistics of buffer or the aver-
age packet per queue for a specified Ether-
net/PON port.
IFPORTS: interface port number
unicast: unicast traffic
non-unicast: multicast traffic
9.3.10.5
Displaying QoS
To display the configuration of QoS, enter following command.
Command
Mode
Description
show
qos
Enable
Global
Interface
[XE/GE/GPON]
Shows the configuration of QoS for all ports.
show
qos interface
{
giga-
bitethernet
|
tengigabitether-
net
|
gpon
}
IFPORT
Shows the configuration of QoS per each port.
show
qos cpu
Enable
Global
Shows the configuration of QoS for CPU
packets.
