User Manual
UMN:CLI
V8102
451
gmrp
fwdall disable
PORTS
Disables a copy of all multicast packet forwarding to a
specific port.
9.8.3.3
GMRP Registration Mode
There are three types of the GMRP registration modes as shown below:
•
normal:
It supports dynamic GMRP multicast registration and deregistration on the
port.
•
fixed:
It supports a registration of all the multicast groups currently registered on all
ports, and registers multicast groups that are specific to the port.
•
forbidden:
It supports the deregistration of all GMRP multicasts and prevention of
any further GMRP multicast registration on the port.
To specify a type of GMRP registration mode, use the following command.
Command
Mode
Description
gmrp
registration
{
normal
|
fixed
|
forbidden
}
PORTS
Global
Specifies a type of GMRP registration mode. (default:
normal)
9.8.3.4
GMRP PDUs Transmission
To enable/disable the port to transmit GMRP PDUs (Protocol Data Unit) including an at-
tribute of GMRP applicant, use the following command.
Command
Mode
Description
gmrp
applicant
participant
PORTS
Global
Enables a port to transmit GMRP PDUs
gmrp
applicant non-participant
PORTS
Disables a port to transmit GMRP PDUs.
9.8.3.5
Static Group MAC Address
To specify a static group MAC address for GMRP applicants, use the following command.
Command
Mode
Description
gmrp
static
VLANS
PORTS
MACADDR
Global
Specifies a static MAC address of a group
VLANS: VLAN ID (1-4094)
MACADDR: MAC address of a Group
no gmrp
static VLANS PORTS
MACADDR
Deletes a static MAC address of a group
9.8.3.6
Displaying GMRP
To display the configured GMRP or GMRP statistics, use the following command.
Command
Mode
Description
show gmrp
[
VLANS
]
Enable
Global
Shows the status of all configurations related to GMRP.
VLANS: VLAN ID (1-4094)
