User Manual
UMN:CLI
V8102
513
To specify the source IP address of IGMP membership report and leave group messages
that is sent by IGMP proxy-service (upstream) interface, use the following command.
Command
Mode
Description
ip
igmp
proxy-service
sip
{
A.B.C.D
|
first-reporter
}
Interface
[VLAN]
Configures the source IP address of IGMP member-
ship report and leave group messages that is sent by
proxy-service interface.
A.B.C.D: Source IP address that manually entered by
user
first-reporter: Source IP address of the host that sent
the first IGMP membership report.
last-reporter: Source IP of the host that sent the last
IGMP membership report.
(Default : proxy-service interface IP address)
no ip igmp proxy-service sip
Removes the source IP configuration for IGMP mem-
bership report and leave group messages.
10.2.7.7
Querying with Real Querirer
’s Source IP Address
To send hosts queries with the actual source IP addresses, not with mroute-proxy inter-
face
’s IP address, use the following command.
Command
Mode
Description
ip igmp mroute-proxy querier
address proxy-service
Interface
[VLAN]
Sets IGMP queries with original query
’s source IP ad-
dress that is received on the mroute-proxy interface
no ip igmp mroute-proxy querier
address proxy-service
Deletes the query
’s source IP configuration.
10.2.7.8
Displaying IGMP Proxy Information
To display IGMP proxy-service information, use the following command.
Command
Mode
Description
show ip igmp-proxy groups
[
detail
]
Enable
Global
Shows the IGMP group membership information of
upstream interfaces.
detail: IGMPv3 source information
A.B.C.D: multicast group address
show ip igmp-proxy groups
A.B.C.D
[
detail
]
show ip igmp-proxy groups
{
gigabitethernet
|
tengiga-
bitethernet
|
gpon
|
chan-
nelgroup
}
IFPORT
[
detail
]
show ip igmp-proxy groups
vlan
VLANS
To display IGMP proxy group membership information, use the following command.
Command
Mode
Description
show ip igmp proxy groups
Enable
Shows the IGMP proxy group membership information.
