UMN:CLI
User Manual
V8102
520
sparse
] [
summary
]
A.B.C.D: group address
show ip mroute
A.B.C.D A.B.C.D
[
dense
|
sparse
] [
summary
]
Shows the multicast routing entries for a given group
and source.
A.B.C.D: group/source address
show ip mroute
A.B.C.D/M
[
dense
|
sparse
] [
summary
]
Shows the multicast routing entries for a given group
range.
A.B.C.D/M: group address and prefix
If you use the
clear ip mroute
command, the MRIB clears the multicast routing entries in
its multicast routing table, and removes the entries from the multicast forwarder.
To delete the multicast routing entries in the MRIB, use the following command.
Command
Mode
Description
clear ip mroute *
Enable
Global
Deletes all multicast route entries.
clear ip mroute
A.B.C.D
[
A.B.C.D
]
Deletes a specified multicast route entry.
A.B.C.D: group/source address
To clear the multicast forwarding cache (MFC) and tree information base (TIB) entries in
the PIM-SM protocol level, use the following command.
Command
Mode
Description
clear ip mroute *
[
pim sparse-
mode
]
Enable
Global
Deletes all MFC and TIB entries in the PIM-SM proto-
col.
clear ip mroute
A.B.C.D
[
A.B.C.D
]
[
pim sparse-mode
]
Deletes a specified MFC and TIB entry in the PIM-SM
protocol.
A.B.C.D: group/source address
When clearing the MRIB entries, you must specify the group address prior to the source
address.
10.3.1.7
Displaying RPF information
To display RPF (Reverse Path Forwarding) information for multicast source, use the fol-
lowing command.
Command
Mode
Description
show ip rpf A.B.C.D
Enable
Global
Shows RPF information.
A.B.C.D: IP address of multicast source
10.3.1.8
Displaying MRIB Statistics
To display the multicast routing statistics entries in the MRIB, use the following command.
Command
Mode
Description
show ip mroute
count
Enable
Shows all multicast routing statistics entries.
!
