UMN:CLI
User Manual
V8102
538
To exclude the GenID option from the PIM hello messages, use the following command.
Command
Mode
Description
ip pim exclude-genid
Interface
[VLAN]
Excludes the GenID from the hello messages.
no ip pim exclude-genid
Includes the GenID from the hello messages.
10.3.3.6
Debugging PIM-SM
To enable PIM-SM debugging, use the following command.
Command
Mode
Description
debug pim sparse-mode
{
all
|
events
|
mfc | mib | mtrace |
nexthop
|
nsm
|
state
|
packet
[
in
|
out
]}
Enable
Enables PIM-SM debugging.
all: all PIM-SM debugging
events: events debugging
mfc: MFC add/delete/update debugging
mib: MIBs debugging
mtrace: Mtrace messages
nexthop: nexthop communications debugging
nsm: NSM communications debugging
state: debugging of state transition on all FSMs
packet: incoming and/or outgoing packets debugging
no debug pim
sparse-mode
{
all
|
events
|
mfc | mib | mtrace |
nexthop
|
nsm
|
state
|
packet
[
in
|
out
]}
Disables PIM-SM debugging.
To enable PIM-SM timer debugging, use the following command.
Command
Mode
Description
debug pim sparse-mode timer
Enable
Enables PIM-SM timer debugging.
debug pim sparse-mode timer
assert
[
at
]
Enables PIM-SM assert timer debugging.
debug pim sparse-mode timer
bsr
[
bst
|
crp
]
Enables PIM-SM BSR timer debugging.
bst: bootstrap debugging timer
crp: candidate RP debugging timer
debug pim sparse-mode timer
hello
[
ht
|
nlt
|
tht
]
Enables PIM-SM hello timer debugging.
ht: hello timer
nlt: neighbor liveness timer
tht: triggered hello timer
debug pim sparse-mode timer
joinprune
[
jt
|
et
|
ppt
|
kat
|
ot
]
Enables PIM-SM join/prune timer debugging.
jt: join timer
et: expiry timer
ppt: prune pending timer
kat: keep alive timer
ot: override timer
debug pim sparse-mode timer
register
[
rst
]
Enables PIM-SM register timer debugging.
