UMN:CLI
User Manual
V8102
542
10.4
Displaying IP Multicast Interface
To display information about IP multicast interface configuration parameters, use the fol-
lowing command.
Command
Mode
Description
show ip mvif
Enable
Global
Shows information about IP multicast interface.
show ip mvif channelgroup
IFPORT
Shows information about IP multicast interface config-
ured.
IFPORT: interface port number
VLANID: VLAN ID
show ip mvif gpon IFPORT
show ip mvif tengigabitethernet
IFPORT
show ip mvif vlan VLANID