UMN:CLI
User Manual
V8102
598
mand.
Command
Mode
Description
bgp
router-id A.B.C.D
Router
Configures the router identifier.
A.B.C.D: router ID
no bgp
router-id
[
A.B.C.D
]
Deletes a configured router ID.
To display router-id, use the following command.
Command
Mode
Description
show router-id
Global
Shows router identifier.
12.1.1.4
Enabling ASN Capabilities
In case of attempt to change the AS capability from 2 to 4 or 4 to 2, a prompt occurs to
remove the VRF configuration because the route distinguisher (RD) configuration whould
have been created with the current capability.
To be Not changed while loading from a saved configuration with AS4 capability and BGP
VRF configuration, use the following command.
Command
Mode
Description
bgp
extended-asn-cap
Global
Configures a BGP router to send 4-octet ASN capa-
bilies.
no bgp
extended-asn-cap
Disables a BGP router to send 4-octet ASN capabili-
ties.
12.1.1.5
Registering BGP Neighbor
To assign IP address or peer group name for BGP Neighboring router within specified AS
number, use the following command.
Command
Mode
Description
neighbor
{
A.B.C.D
|
X:X::X:X
|
WORD
}
remote-as
<1-65535>
Router
AF
Configures BGP neighboring router and specify AS
number of BGP Neighbors.
A.B.C.D: neighbor IP address
X:X::X:X: neighbor IPv6 address.
WORD: peer group name or neighbor tag
1-65535: remote AS Number
1-4294967295 | 1.0-XX.YY:
neighbor’s AS number
when extended capabilities are configured.
neighbor
{
A.B.C.D
|
X:X::X:X
|
WORD
}
remote-as
{<1-
4294967295> | <1.0-XX.YY>}
no neighbor
{
A.B.C.D
|
X:X::X:X
|
WORD
}
remote-as
<1-65535>
Deletes the configured BGP Neighbor within specified
AS number.
neighbor
{
A.B.C.D
|
X:X::X:X
|
WORD
}
remote-as
{<1-
4294967295> | <1.0-XX.YY>}
