User Manual
UMN:CLI
V8102
607
bgp bestpath med remove-recv-
med
Configures the router to remove recv MED attribute.
bgp bestpath med remove-send-
med
Configures the router to remove send MED attribute.
To ignore MED values of paths on the exchange of information between confederation
peers, use the following command.
Command
Mode
Description
no bgp bestpath med confed
[
missing-as-worst
]
Router
Ignores MEDs of paths on the exchange of their infor-
mation between confederation peers.
no bgp bestpath med missing-
as-worst
[
confed
]
no bgp bestpath med remove-
recv-med
no bgp bestpath med remove-
send-med
If there are several equal paths, one of them has no MED value. Because this path is
considered as
“zero” without MED value, it will be chosen the best path. But the path
would be the worst one if it has no MED value after
missing-as-worst
is set.
After
missing-as-worst
parameter is configured in the system, the path will be recog-
nized as the worst path without MED value.
12.1.11.6
Graceful Restart
Graceful restart allows a router undergoing a restart to inform its adjacent neighbors and
peers of its condition. The restarting router requests a grace period from the neighbor or
peer, which can then cooperate with the restarting router. With a graceful restart, the re-
starting router can still forward traffic during the restart period, and convergence in the
network is not disrupted. The restart is not visible to the rest of the network, and the re-
starting router is not removed from the network topology.
The main benefits of graceful restart are uninterrupted packet forwarding and temporary
suppression of all routing protocol updates. Graceful restart thus allows a router to ex-
change path information with the neighboring router.
To configure graceful restart specifically for BGP, use the following command.
Command
Mode
Description
bgp graceful-restart
Router
Sets to use graceful restart in BGP protocol.
no bgp graceful-restart
Disables the restart time value setting.
Therefore, 2 options of the time can be used to speed up routing convergence by its peer
in case that BGP doesn
’t come back after a restart.
•
Restart Time
i
