User Manual
UMN:CLI
V8102
617
clear ip bgp peer-group
GROUP
Global
fied peer group.
GROUP: peer group name
clear
ipv6
bgp
peer-group
GROUP
when you configure the detail parameters.
To reset the sessions of BGP routers which are members of specified peer group and ini-
tialize the details of route configurations, use the following command.
Command
Mode
Description
clear ip bgp peer-group
GROUP
in
[
prefix-filter
]
Enable
Global
Resets the session for all members of specified peer
group.
in: clears incoming advertised routes.
prefix-filter: pushes out prefix-list ORF and does in-
bound soft reconfiguration.
GROUP: peer group name
clear
ipv6
bgp
peer-group
GROUP
in
[
prefix-filter
]
clear bgp peer-group
GROUP
in
[
prefix-filter
]
clear ip bgp peer-group
GROUP
{
unicast
|
multicast
}
in
[
prefix-
filter
]
clear ip bgp peer-group
GROUP
out
Resets the session for all members of specified peer
group.
GROUP: peer group name
out: clears outgoing advertised routes.
unicast | multicast: address family modifier
clear
ipv6
bgp
peer-group
GROUP out
clear bgp peer-group
GROUP
out
clear ip bgp peer-group
GROUP
{
unicast
|
multicast
}
out
clear ip bgp peer-group
GROUP
soft
[
in
|
out
]
Resets the route information only while the session is
possible for all members of specified peer group. Apply
the route either incoming or outgoing routes.
GROUP: peer group name
clear
ipv6
bgp
peer-group
GROUP soft
[
in
|
out
]
clear bgp peer-group
GROUP
soft
[
in
|
out
]
clear ip bgp peer-group
GROUP
{
unicast
|
multicast
}
soft
[
in
|
out
]
12.1.16
BGP AS-path Access List
Autonomous System (AS) is one of the essential element of BGP. AS framework provides
distance vector metric and loop detection to BGP. An AS path access list can be spcified
on both inbound and outbound BGP routes.
To define a new Autonomous System (AS) path access-list, use the following command.
i
