User Manual
UMN:CLI
V8102
693
ipv6 ospf restart helper only-upgrade max-
grace-period
<1-1800> [
only-reload
]
To release the configuration, use the following command.
Command
Mode
Description
no ipv6 ospf restart grace-period
Global
Releases the configuration.
Never: prevent the neighbor from enter-
ing helper mode.
A.B.C.D: router ID of neighbor tonever
to act as helper.
ipv6 ospf restart helper never
[
router-id
A.B.C.D
]
no ipv6 ospf restart helper max-grace-period
12.3.9
Default Route
You can configure ASBR (Autonomous System Boundary Router) to transmit default
route to OSPF network. Autonomous System Boundary router transmits route created ex-
ternally to OSPF network. However, it does not create system default route.
To have autonomous System Boundary router create system default route, use the follow-
ing command.
Command
Mode
Description
default-information originate
Router
Configures the default route.
The following items are detail options for the Default Route configuration.
•
metric
Configures Metric value of the default route.
•
metric-type 1 | 2
is for type of finding the path.
metric-type 1
uses internal path cost with external path
cost as a cost,
metric type 2
always uses external cost value only.
•
always
Transmits the default route to outside.
•
route-map
Transmits specific routing information to assigned route which has MAP-NAME.
The detail options for default route configuration are classified in 4 as above, and those
configurations can be selected more than 2 options without order.
The following is explaining options of command:
•
metric
<0-16777214>
•
metric-type
<1-2>
•
always
•
route-map
MAP-NAME
