UMN:CLI
User Manual
V8102
712
clear ip rip route
[
bgp
|
connected
|
kernel
|
ospf
|
rip
|
isis
|
static
|
all
|
A.B.C.D/M
]
Enable
Global
Deletes RIP information being used in
router.
12.4.17.2
Displaying Debugging Information
To quickly diagnose problems, the
debug
command is useful for customers. To enable
debugging of RIP routing transactions, use the following command.
Command
Mode
Description
debug rip
[
all
]
Enable
Turns on all debugging options of changed RIP infor-
mation.
debug rip events
Enables a debugging of RIP event such as packet
transmit and sending and changed RIP information.
debug rip nsm
Enables RIP nsm debugging.
debug rip packet
[
recv
|
send
]
Shows more detailed information about RIP packet.
The information includes address of packet transmis-
sion and port number.
debug rip packet
[
recv
|
send
]
detail
To disable debugging of RIP routing transactions, use the following command.
Command
Mode
Description
no debug rip
[
all
]
Enable
Turns off all debugging options of changed RIP infor-
mation.
no debug rip events
Disables a debugging of RIP event such as packet
transmit and sending and changed RIP information.
no debug rip nsm
Disables RIP nsm debugging.
no debug rip packet
[
recv
|
send
]
Disables a debugging of RIP packets.
no debug rip packet
[
recv
|
send
]
detail
To display the debugging information, use the following command.
Command
Mode
Description
show debugging rip
Enable
Global
Shows the debugging information of RIP.
