User Manual
UMN:CLI
V8102
755
Command
Mode
Description
olt omcc-recovery disable
Disables the OMCC recovery monitoring function with
ONU deactivation process.
Disabling OMCC recovery monitoring with
olt omcc-recovery disable
command pro-
vides the data transmission service between OLT and ONU without ONU deactivation
process even if an error occurs on the OMCC.
To display the information of OMCC recovery monitoring, use the following command.
Command
Mode
Description
show olt omcc-recovery
[
gpon
OLT-ID
]
Enable
Global
Shows the status of OMCC recovery monitoring.
show olt omcc-recovery
Interface
[GPON]
To configure the force MIB upload option to resolve the ONU deactivation issue because
of OMCC error, use the following command.
Command
Mode
Description
onu mib-upload ONU-ID
Interface
[GPON]
Configures the force MIB upload of ONU to resolve the
ONU deactivation caused by OMCC error.
13.1.22
OMCI-DB Validation Check
To check whether information about OMCI ME uploaded from ONU is normal or abnormal,
use the following command.
Command
Mode
Description
olt omci-db-check enable
Interface
[GPON]
Enables the OMCI DB check function.
olt omci-db-check disable
Disables the OMCI DB check function.
olt omci-db-check invalid-action
base-db {mib-reset | none |
notify | onu-reset} <
1-100
>
Configures action for invalid OMCI detection
base-db
:
action for base DB fail
invalid-db: action for invalid DB
ref-db: action for referece DB fail
1-100: retry count
olt omci-db-check invalid-action
invalid-db {mib-reset | none |
notify | onu-reset} <
1-100
>
olt omci-db-check invalid-action
ref-db {mib-reset | none | notify |
onu-reset} <
1-100
>
i
