UMN:CLI
User Manual
V8102
76
To display the configured daylight saving time, use the following command.
Command
Mode
Description
show clock summer-time
Enable
Global
Shows the configured summer time.
The following example sets system time from 12:00, August 18, 2011 to 12:00, August 20,
2011.
SWITCH(config)#
time-zone GMT+9
SWITCH(config)#
clock summer-time GMT+9 date 18 8 2011 12:00 20 8 2011 12:00
60
SWITCH(config)#
show clock summer-time
=============================================
Summer time is set. But not running.
---------------------------------------------
Summer time type : this year only
---------------------------------------------
Start time : 2011 aug 18 12:00
Stop time : 2011 aug 20 12:00
=============================================
SWITCH(config)#
4.1.5.3
Time Zone
The V8102 provides three kinds of time zone, GMT, UCT and UTC. The time zone of the
switch is predefined as GMT (Greenwich Mean Time). You can also set the time zone
where the network element belongs.
To set the time zone, use the following command.
Command
Mode
Description
time-zone
TIMEZONE
Global
Sets the time zone (refer to the below table).
clear
time-zone
Clears a configured time zone.
To display the world time zone, use the following command.
Command
Mode
Description
show
time-zone
Enable
Global
Shows the world time zone map.
