User Manual
UMN:CLI
V8102
903
14.2
IUs Upgrade
14.2.1
General Upgrade for IUs
To upgrade the system software of a specific module, perform the following step-by-step
instruction:
Step 1
Download the system software image of IU, use the following command.
Command
Mode
Description
copy
{
ftp
|
tftp
}
iu
download
Enable
Downloads the system software of the Interface unit
from FTP/TFTP server.
Step 2
Select an IU in the specified slot and uploads the new system software using the follow-
ing command.
Command
Mode
Description
slot
upgrade-mode
iu
SLOT_NUMBER
manual
Global
Enable IU manual upgrade mode.
SLOT_NUMBER: slot number
slot upgrade iu SLOT_NUMBER
Select a slot number of IU and performs the upgrade.
Step 3
Restart a specific IU in the slot using the following command.
Command
Mode
Description
slot restart iu
SLOT_NUMBER
Global
Resets an interface module in the specified slot num-
ber.
Step 4
Display the new system software using the following command.
Command
Mode
Description
show
slot
nos
iu
{
all
|
SLOT_NUMBER
]
Enable
Global
Shows the system software of each slot.
The following is an example of upgrading the SIU_GPON16 software image.
SWITCH#
copy ftp iu download
To exit : press Ctrl+D
--------------------------------------
IP address or name of remote host (FTP): 10.55.2.202
Download File Name : V8102/SIU_GPON16/1.x/V8102_SIU_GPON16.3.01_1025-02.x
User Name : qa
Password:
Hash mark printing on (1024 bytes/hash mark).
Downloading file ....
##############################################################################
##############################################################################
##############################################################################
##############################################################################
