User Manual
UMN:CLI
V8102
95
5.5.4
Tunnel Encapsulation Mode
tunnel mode
command specifies a tunnel encapsulation mode for either GRE and IPIP
mode The GRE tunnel mode is used for IPv6-to-IPv6 tunneling.
To configure an IPv6 tunnel mode, use the following command.
Command
Mode
Description
tunnl mode ipv6ip
{
6to4
|
isatap
}
Interface
[Tunnel/GPON]
Configures an IPv6 tunnel mode.
6to4:
IPv6 automatic tunneling using 6to4.
isatap: IPv6 automatic tunneling using ISATAP.
no tunnl mode
Deletes the configuration from a mode.
