Dashmate DSH-440, User Manual

7

use the 

OK

 button to confirm and move between fields.

  • Time is set and displayed in a 24 hour format.

  •  After setting the date and time the bottom 

DD/MM/YY

 fields are used 

to change format that the date will be displayed.

  •  Once the date and time have been set, the 

MENU

 button can be used 

to save and exit back to the 

SETUP

 menu.

7. SET LOOP RECORDING:

   Your 

DSH-440

 has the ability to record in a Loop mode, which means 

older blocks of video files will be overwritten once the memory card 
becomes full. You can set the amount of video block time the 

DSH-440

will record for before a new video file is started.

   To change the length of the videos that the 

DSH-440

 records follow the 

directions below:

  •  Use the 

MODE 

button to make sure you are in 

VIDEO

 mode (Video 

camera icon will be displayed in the top left corner of the screen).

  •  Ensure you are not currently recording. If the red circle record indicator 

is flashing at the top left of the 

DSH-440

’s screen, push the 

OK 

button 

to stop recording.

  • Push the 

MENU

 button taking you to the 

VIDEO

 menu.

  •  Use the 

DOWN

 button to highlight the setting named 

Loop 

Recording

 and push 

OK

.

  •  Use the 

UP

 and 

DOWN 

buttons to highlight the required video length 

(The OFF setting will record the longest possible loops keeping the file 
size under 2GB, which is around 7 minutes at 1080P resolution).

  •  To confirm selection push the 

OK

 button, the 

DSH-440 

will take you 

back to the 

VIDEO

 menu.

8. SET G-SENSOR:

   The 

G-Sensor 

monitors any unnatural bumps or shakes and logs the 

associated footage as Locked ensuring any footage of potential crashes 
is not recorded over with the regular loop footage.

  To set the 

G-Sensor

 follow the directions below

  •  Use the 

MODE

 button to make sure you are in 

VIDEO 

mode (Video 

camera icon will be displayed in the top left corner of the screen).

  •  Ensure you are not currently recording. If the red circle record indicator 

is flashing at the top left of the 

DSH-440

’s screen, push the 

OK

 button 

to stop recording.

  •  Push the 

MENU 

button taking you to the 

VIDEO

 menu.

  •  Use the 

DOWN

 button to highlight the setting named 

G-Sensor 

and 

push 

OK

.

  •  Using the 

UP 

and 

DOWN 

button, highlight the required sensitivity 

of the 

G-Sensor

 (2G is the most sensitive setting only requiring 

small bumps to log footage as Locked, and 8G is the least sensitive 
requiring a larger amount of activity to log footage as Locked).

  •  To confirm selection push the 

OK

 button, the 

DSH-440

 will take you 

back to the 

VIDEO

 menu.