02-22-10
F2000EX EASY
PAGE 16 / 22
CODDE 1
ISSUE 3
ATA 22 – AUTO FLIGHT
DESCRIPTION
DGT94085
DASSAULT AVIATION Proprietary Data
TOUCH CONTROL STEERING (TCS) RELEASE
FD MODES
BEFORE TCS ACTIVATION
FD MODES
AFTER TCS ACTIVATION
LNAV LNAV
HDG (XXX°)
HDG (XXX°)
TRK (XYZ°)
TRK (XYZ°)
ROL (X°)
ROL at TCS release (*)
LOC LOC
ALT (XXX ft)
ALT at TCS release (XXX ft)
VS (XXX ft/min)
VS at TCS release (YYY ft/min)
PATH (XX°)
PATH at TCS release (YY°)
ASEL ASEL
CLB (XXX kt)
Speed at TCS release (YYY kt)
G/S G/S
VGP VGP
VPTH VPTH
(*) refer to basic ROL mode
FIGURE 02-22-10-21 TCS HDG ALT
WINDSHEAR MODE (NOT AVAILABLE)
WindShear (WS) escape mode can be selected each time a Windshear condition is
detected by the Terrain Awareness and Warning System (TAWS) by pressing the TOGA
pushbutton on the yoke. This action disconnects the AutoPilot and changes the FD / TD
commands. FD and TD will thus provide vertical and thrust guidance to achieve the best
escape path. FD command, when followed, will maintain the IAS close to the stall speed. TD
command, when followed, will maintain the maximum take-off power.
Windshear mode is deselected upon selection of any other vertical mode.