background image

dCS 

Network Bridge User Manual 

Software Issue 1.0x 

 

December 2016 

  

 

Network Bridge Manual v1_0x 

Page 27

 English 

version

 

 

Limited warranty 

General   

dCS

 warrants this product against defects in materials and workmanship for a period of 3 years from 

the date the unit was originally shipped from 

dCS

. If the product is purchased and registered with 

dCS

 

within 6 months of the date the unit was originally shipped from 

dCS

, we will start the warranty on the 

purchase date. For units registered later than 6 months from the ship date, we will start the warranty 
from the ship date unless the registration is supported by the original sales invoice. During the 
warranty period, 

dCS

 will repair or, at our absolute discretion, replace a faulty product. Warranty 

repairs must only be carried out by 

dCS

 or our authorised service agents. Please contact your dealer if 

your unit requires service. 

To register this product, either register online at 

www.dcsltd.co.uk

 or complete the 

Product 

Registration

 form within 30 days of the sale and return it to 

dCS

. On receipt of the registration, 

dCS

 

will add your contact details to our customer database. 

dCS

 will use this information for warranty 

purposes only, we will not contact you directly for reasons relating to sales and marketing. 

This warranty applies to the original owner, it is not transferable. 

 

Warranty exclusions 

The Warranty does not cover wear and tear. 

The Warranty on this product will be void if: 

 

the product is misused in any way. 

 

any unauthorised modifications or repairs are carried out. 

 

the product is not used in accordance with the Operating Conditions stated in this manual

.

 

 

the product is serviced or repaired other than by 

dCS

 or our authorised service agents. 

 

the product is operated without a mains earth (or ground) connection. 

 

the unit is returned inadequately packed. 

dCS

 reserve the right to apply a service charge if a product returned for warranty repair is found to be 

operating correctly, or if a product is returned without a returns number being issued. 

This warranty covers parts and labour only, it does not cover shipping charges or tax/duty. 

Our dealers or distributors are NOT authorised to extend the terms of this warranty, 

dCS

 cannot accept 

responsibility for any attempt to do so. 

Products re-sold by 

dCS

 on a “used” basis may be subject to reduced warranty terms. 

 

Obtaining service 

Should you encounter a problem, contact your authorised 

dCS

 dealer for advice, quoting the model, 

the full serial number, software version number, and giving a detailed description of the fault. Your 
dealer will advise you fully on actions that need to be taken and give you a returns number. When 
returning a unit, the original packaging should be used to avoid transit damage. Replacement 
packaging sets may be purchased from 

dCS. 

During the Warranty period, there will normally be no charge for parts or labour. 

Operating conditions 

 

The supply voltage must remain /-10% of the A.C. voltage specified on the back panel. 

 

The supply frequency must be 50Hz or 60Hz. 

 

Ambient temperature range: 0

°

C (32

°

F) to 45

°

C (113

°

F), non-condensing. 

 

Do not install the unit near heat sources such as radiators, air ducts, power amplifiers or direct 
strong sunlight. 

 

If in doubt, the easy test is – the unit is happy to work anywhere a human is. 

 

Summary of Contents for DCS Network Bridges






























Reviews: