dCS
Pronto User Manual
Software Issue 2.1x
Data Conversion Systems Ltd.
April 2010
Manual filename: dCS Pronto Manual v2_1x.doc
Page 11
English version
Using Macros to change the system set-up
Press the silver button by the
Macro
label to jump to the Macro page.
!
The 7 buttons on this page each send a series of commands (a macro) at timed intervals
to the whole 4-box system. The commands will only be received properly if all the
dCS
units in the system can “see” the IR beam from the Pronto for about 5 seconds after
pressing the button. A swirling icon appears in the top left corner of the screen while
commands are being sent.
Macro page
•
The top 2 buttons send a series of codes (a macro) to set up a 4-box
system to upsample data from the Upsampler’s
AES
input to either
176.4
kS/s or
DSD
.
•
The second row of 2 buttons sets the system to upsample data from
the Upsampler’s
RCA1
input to either
176.4
kS/s or
DSD
.
•
The third row of 3 buttons sets the system to upsample data from the
Upsampler’s
USB
input to either
176.4
kS/s or
192
kS/s or
DSD
.
The
Paganini
4-box system responds similarly.
If you wish, you can download the
dCS
Pronto configuration file from
using the ProntoEdit Professional v2.4 program to change these macros or add your own macros to
suit your system.
!
Please consult the Philips Pronto manual for basic instructions and visit
Sorry,
dCS
cannot offer support for customisation.
Please consult your dealer or an experienced A/V installer if you need help.
