Set sensor range
Some Smart Q sensors have multiple ranges e.g. sound can be in decibels (dBA) or milli volts (mV).
The range of a sensor can be altered whilst in Meter mode.
!
!
Whilst in Meter use the blue up/down
buttons to scroll through the list
until the pointer is pointing at the appropriate sensor.
!
!
Press the green button to view the ranges available.
Note:
If there isn’t a choice of range available for the selected sensor then pressing enter will have no effect.
!
!
An asterisk * will indicate the present range selected. Use the blue
up/down
buttons to scroll the list until the pointer is pointing at the
required range.
!
!
Press the green button to select the range and return to Meter.
Snapshot
Snapshot mode enables you to capture sensor readings every time the green button is pressed,
rather than at a regular time intervals. The readings are stored as a data set in
EASY
SENSE
Q
Advanced’s memory.
!
!
Connect the sensors. If the display is turned off, press any button to wake up
EASY
SENSE
Q
Advanced.
!
!
Use the blue up/down
buttons to scroll through the menu until the
pointer is pointing at Snapshot.
!
!
Press the green button to select Snapshot.
!
!
Each data sample can be given a name/number e.g. the location at which the sample was taken.
Use the blue up/down
buttons to select from either yes or no for this option.
10