Easy Log
In Easy Log it is not necessary to set the duration of the recording –
EASY
SENSE
Q
Advanced will
capture data until stopped (up to a maximum of 41 days). The data set will then be stored in
EASY
SENSE
Q
Advanced’s memory.
!
!
Connect the sensors. If the display is turned off, press any button to wake up
EASY
SENSE
Q
Advanced.
!
!
Use the blue up/down
buttons to scroll though the menu until the
pointer is pointing at EasyLog.
!
!
Press the green button to select EasyLog and automatically begin
recording.
The bottom line of the LCD screen is a visual indicator of the logging as
it takes place.
The blue up/down
buttons can be used to scroll and view the values from the sensors on the
LCD screen whilst still logging.
Note:
If more than 2 minutes have elapsed between readings,
EASY
SENSE Q Advanced will go into ‘sleep’ mode.
Press any button to wake up the unit.
!
!
When the experiment is complete press the red
button.
Q
Advanced will continue to log data
until you press the green button to confirm your choice and go to the Recording finished .
menu.
Note:
If the Stop button was not pressed intentionally, press the red
button to continue logging.
!
!
Press the green button to return to the
Main Menu
, or scroll to Repeat .
the experiment or Name the data set.
Repeat experiment
will take you back to EasyLog in the Main Menu.
Name data set
will open a window in which text or numbers can be
selected for the name of the data set. Use the blue up/down
buttons to scroll through the letters and numbers. Press the green
button to select as appropriate.
Press the red
button to finish and go to the recording finished menu.
12