Appendix 5: Timing options
Time at A
Time at A or B
Time from A to B
35
A
Stop - A Off
Start - A On
A measurement will be taken each time a
signal change is detected at
either
sensor
5:A or sensor 6:B. The current measurement
from A or B will be displayed on the LCD
screen.
Timing will start when a signal change is
detected at sensor 5:A and stops when the
signal at 6:B changes (so it measures the time
taken by an object to travel from sensor A to
sensor B).
The blue buttons can be used to scroll through
and examine the readings already taken.
The average
measurement
The measurement
Over this number
of readings
The reading number
of this measurement
The measurement The reading
number of the
measurement
shown
Timing starts when the signal at input 5:A changes and stops
when the signal reverts back.
!
!
With Light Gates it will be the time it takes for an object to
pass through the light beam.
!
!
For a Push Switch it will be the length of time that the switch
is kept depressed.
!
!
For Timing mats it will be the length of time someone stands
on the mat.
The blue buttons can be used to scroll through and examine the
readings already taken.