Note:
Connect the
EASY
SENSE Q Advanced unit to each USB port on the computer that maybe used so that
the drivers can be installed.
b)
If
EASY
SENSE
Q
Advanced is to be ‘connected’ via
Bluetooth™
use the instructions provided
on page 41.
Notes:
!
!
To ‘connect’ via Bluetooth your
EASY
SENSE Q Advanced unit must have Bluetooth built-in. This will be
indicated by a Bluetooth symbol above the Data Harvest logo.
!
!
If you wish to add Bluetooth functionality to your
EASY
SENSE Q Advanced unit, please contact Data
Harvest for information about a Bluetooth upgrade.
Step 3:
!
!
Check that the LCD screen on
EASY
SENSE
Q
Advanced is displaying
the ‘Main Menu’.
Note:
In most circumstances
EASY
SENSE Q Advanced will
not
communicate with the PC if it is taking samples. If
the LCD screen shows samples being taken press the red square
button and then the green triangle to stop
the recording.
!
!
Open the
EASY
SENSE software program.
Step 4:
The first time the
EASY
SENSE program is opened a ‘Select
Program Level’ window will automatically open. Select a suitable
user’s level.
!
!
Level 1 is aimed at ‘start’ level (e.g. up to 9 years old).
!
!
Level 2 is aimed at ‘mid’ level (e.g. 9 – 15 years old)
!
!
Level 3 is aimed at ‘exam’ level (e.g.15 years plus).
Note:
The program level can be altered at anytime using the Level icon once a logging option has been opened.
Step 5:
An Interface option window will open.
1. Select the Interface as
EASY
SENSE Range.
2. Select the method of connection.
!
!
If you are connecting via the USB port select ‘USB port’.
!
!
If you are using Bluetooth, select Serial port and then the serial
(COM) port configured for Bluetooth from the drop down menu.
3. If you use different interfaces or methods of connection, tick the ‘Show
at startup’ option so you can check your current selection and make any
adjustments as necessary each time
EASY
SENSE opens.
4. Click on OK. The program will save your selection so it will be automatically configured when
next used.
When a connection is established the Home page will open. Select one of the New experiment
modes i.e. EasyLog, Graph, Meters, Scope, Snapshot or Timing.
6