EASY
SENSE V-Hub Reference Manual
DO260 (2)
Data Harvest Group Ltd, 2017
4
The V-Hub interface
V-Hub
’s button
The button is used to select the connection method, reset and switch the logger on and off.
Individual short presses of the button will scroll through the cursor through
the connection options: Bluetooth, USB or Wi-Fi (if fitted). With the cursor
pointing at the appropriate option press the button until the option highlights
then release. Use a short press to exit.
Use a 5 second press to switch V-Hub Off even when connected to power. To switch back on press and
hold down the button until the word V-Hub displays then release.
To hard reset the interface press and hold down the button for about 10 seconds until the word V-Hub
displays then release.
If battery powered and not in use V-Hub will switch off automatically after 2 minutes. Press the button to
switch back on.
LCD display
The LCD displays a
Menu of the connection options available to select (Bluetooth, USB or Wi-Fi, if fitted)
About,
to check the logger’s firmware version, logger name and serial number
Indicator of the status of the battery
Note:
V-Hub does not display data direct from the sensors, it needs to be connected to the EasySense software that
has been installed on a computer or tablet, and data will be displayed on the computer/tablets screen.
►
Bluetooth
USB
Wi-Fi
About
Plug-in sensors inputs
V-Hub
8
Light sensor
(visible
Button press
LCD display
showing
connection
method
USB input
Battery status
indicator
V-Hub
8
Air Pressure & Humidity sensors
V-Hub
8
Sound sensor
Plug-in sensors inputs
Screw thread
for metal rod
attachment
