Running a Job on PSV5000 ■ List of Steps to Start a Job
- 14 -
Data I/O ■ 096-0466-001E
Regardless of input
media used (trays or
tape), all should offer
devices right-side-up
(
‘
live bug
’
orientation.)
PSV5000 Machines
must be level and at
room temperature
before running a job.
1>>
Checking the System
Before you set up for your job, check that:
•
All side panels and doors are closed
•
No one is working on the machine.
•
The external air line is connected.
If the power and air pressure switches are already ON, the
pressure indicator number should be green.
2>>
Installing Input/Output Media
Some optional equipment needs to be set up or their settings checked and
power turned ON, or a process started (even if the equipment was installed
by another individual, such as the administrator).
CAUTION:
Electrostatic discharge (ESD) hazard! Wear an ESD
strap or discharge static against a common ground to prevent damage
to Socket Adapters and devices.
CAUTION:
Safety hazard! Possible personal injury from moving
machinery. Always make sure that the PNP head is stopped in the
Park
or
Tool
position before opening any access doors.
These input/output media are described in this section:
•
Static Trays (next heading)
•
Tape Feeder Input
•
Tape Output
For the Tray Feeder input, see
Setting Up an Automatic Tray Feeder
in the
PSV5000 Owner’s Manual.
If your job or work process uses other options such as a Barcode Scanner,
make sure they are installed and ready. Check with your administrator or
see the PSV5000
Owner’s Manual.
