PSV7000 Ionizer Kit
1 |
P a g e
Chapter 1: Introduction
The PSV7000 Ionizer Kit from Data I/O is a hardware ionizer designed to neutralize static electricity
within the system. The ionizer is implemented in compliance with the requirements of International
Standards IEC 61340-5-1 and IEC 61340-4-7. This kit includes all mounting hardware, system ionizer(s),
air pressure regulator, and Power and Air cables.
The ionizer operates as follows under normal operation:
•
the ionizer generates ions of different polarity alternately to de-ionize the air and
optimize ion balance to within ±10V in energy-saving static electricity elimination mode
•
small holes along the ionizer serve as emitter points for the neutralizing ions
•
these holes improve the distribution and coverage of ions that eliminate static electricity
(factory settings eliminate static electricity within 3.2 seconds at 1000 mm distance)
This document provides instructions for mounting the ionizer hardware, connecting and routing the
Power and Air cables, and testing the ionizer for static electricity reduction/elimination.
Note:
For Dual Ionizer configurations, this document notes any variations
(between single and dual ionizers) with an indented Note paragraph.
