PSV7000 Ionizer Kit
6 |
P a g e
Connect the Air Tubing
1.
Stick 4 adhesive cable tie mounts vertically to the upper beam of the system chassis.
Stick cable tie mounts to upper beam.
2.
Cut the included air tubing into 3 pieces: 240 cm, 30 cm, and 30 cm.
3.
Take a 30-cm length and insert it into one end/side of the ionizer.
Insert short length (30 cm) of air tubing into ionizer.
4.
Repeat the previous step to insert the other 30-cm length of air tubing into the other end of ionizer.
(both of the short lengths—30 cm—of air tubing are now used)
