Installation for MP3-DSP Model V02
The MP3-DSP V02 kit was designed to upgrade your ROWE/AMI Combo Jukebox to play MP3 music files
from a hard disk drive. Any combo jukebox that uses the 4-07773-xx Central Control Computer can be
upgraded. This includes models R-90, R-91, R-92, R-93 and R-94. The player automatically adapts to your
jukebox offering support of 6 discs with each having up to 99 tracks. Most non-combo jukeboxes can also
be upgraded by replacing the CCC EPROM program with a combo support version.
Hooking Up The MP3 Player To Your Jukebox
Attach your disk drive to the MP3-DSP digital music
player board. Apply the adhesive foam pad to the top
half of the enclosure, above the DIN connector.
Assemble enclosure. Plug in the 9-pin mini DIN
connector (arrow or notch facing up). Position the 5-
pin CCC connector through the cable clamps then
plug into P5 “DATA” connector on the Central
Control Computer.
Connect the red 5-pin audio cable to the “aux” input
on the amplifier. If your jukebox has a light display,
plug that connector onto the extended pins. Plug the
other end of the cable to the MP3-DSP audio
connector.
Plug in the DC power connector from the AC adapter
then plug the adapter into the SERVICE outlet on
your jukebox power supply. Turn on your jukebox.
CD Initialization
To perform the CD initialization, place the jukebox
service switch into the SERVICE position then enter
777 on the keypad. When initialization starts, four
dashes will appear on the CCC display. When the
initialization is complete, the CCC display will go
blank.
Playing MP3 Songs
On a combo jukebox, CD's are selected by entering
a four digit number. The first digit is always "5" for
CD selections. The second digit is the disc # less
one. To select disc "1", you would enter "0". The
last two digits are the track # of the song you wish
to play. For example, if you wanted to play disc 3,
track 9, you would enter "5209" on the keypad.
Installation for MP3-DSP Model V03
Upgrade Your ROWE/AMI CD Combo Jukebox