3.5.3.2 WPA/WPA-PSK/WPA2/WPA2-PSK
WPA provides significantly stronger wireless data encryption than WEP.
Refer to fig. 7 in 3.2.6(page 8). You can choice a Security Mode from:
WPA/WPA-PSK/WPA 2/WPA 2-PSK then choice a WPA Algorithm from:
TKIP or AES. TKIP is only for 802.11 b/g (54Mbps max). For faster connection
speeds greater than 54Mbps, select AES or TKIP WPA algorithms.
If WPA or WPA2 is to be selected, you must Enter the settings of the
Radius Server (lP address, Port, etc.).
If WPA-PSK or WPA2-PSK is to be selected, you must input a Pass Phrase.
Radius Server: In WPA authentication mode, the keys can be managed using two
different mechanisms: WPA can either use an external authentication server (e.g.
RADIUS) and EAP like IEEE802.1x, or pre-shared keys without the need
for additional servers(as above WPA-PSK,WPA2-PSK.. .).
3.5.4 WPS setting
WPS (WiFi Protected Setup) can help you quickly and easily setup the connection
between the router and clients. Using the WPS function, you do not need to select the
Security mode and set the Encryption Key. You just need to input the correct PIN code or
select the PBC (or press the WPS button on the front panel) to setup WPS.
Select Wireless Settings: Select WPS in the main menu to enter the WPS setting page as
In figure 17:
