Chapter 3. Setup guide
3.1 TCP/IP Configuration
1 . Click the Start button, then click Control Panel.
2. Double click the Network icon and select the Create a new connection in the Network window.
Follow the network wizard instructions until conclusion, then skip to step 6.
If you have installed TCP/IP protocol before, please skip to step 6.
3. Click the Add button to add network adapter into your computer.
4. Double click Protocol to add TCP/IP protocol.
5. Select Microsoft item in the manufactures list, Choice TCP/IP in the Network
protocols, Click OK button to return to Network window.
6. The TCP/IP protocol should be listed in the Network window. Double click
TCP/IP to set the TCP/IP protocol.
7. Select Obtain an IP address automatically in the, IP Address table .
8. Click OK to complete the install procedure and restart your computer to enable
the TCP/IP protocol.
3.1.1 Network Configuration for DHCP
Windows Vista
1.
Select Network and Sharing in the Control Panel.
2.
Click View Status click Properties.
3.
Click Continue in the User Account Control window.
4.
In the General tab of the Local Area Connection Properties window select Internet
Protocol Version 4 (TCP/IPv4), click Properties.
5.
Click the Obtain an IP address automatically button.
6.
Click the Obtain DNS server address automatically button.
7.
Click OK in the Internet Protocol Version 4(TCP/IPv4) Properties window,
8.
Click OK in the Local Area Connection Properties screen to save the settings.
Windows 7
1.
Click View Network Status and Tasks in the Control Panel.
2.
Click Local Area Connection, click Properties.
3.
Click Internet Protocol Version 4 (TCP/IPv4), click Properties.
4.
Click the Obtain an IP address automatically button.
5.
Click the Obtain DNS server address automatically button.
6.
Click OK in the Internet Protocol Version 4(TCP/IPv4) Properties window,
7.
Click OK in the Local Area Connection Properties screen to save the settings.
