UPS
100MM
100MM
100MM
MAINS
OUTLET
UTILITY INPUT
FUSE
UPS OUTLET
INSTALLATION AND OPERATION
Before installation, please read and understand the following instructions.
Inspect the following items inside box:
User’s Manual
UPS
UNPACKING AND INSPECTION
Examine the packing carton for damage. Notify your dealer immediately if damage is observed. Store the packing in a
safe place for possible future shipment of the UPS.
PLACE THE UPS
Position the UPS on a sturdy, dry surface in a well-ventilated area away from direct sources of heat. Leave at least
100mm clearance all around the UPS to provide adequate ventilation (Reference figure 1).
Figure 1 Figure 2
The UPS is intended for indoor use only. Although your UPS is very rugged, its internal components are not sealed
from the environment. Please kindly note the following (Reference figure 2).
Avoid direct sunlight
Avoid excessive heat
Avoid excessive humidity or liquids
Avoid excessive dust
CONNECT THE UPS TO A 110VAC POWER OUTLET
Connect the Power Cord to a verified grounded 3-wire receptacle. Do not power the UPS using a surge suppressor or
power strip. Switch the main supply SWITCH ON (Reference figure 3).
Figure 3
